Updated Oct 31, 2026· 4 min read

Key takeaways

  • Choose a pump with a adjustable flow if possible.
  • Leave extra space for water to drain back during a power outage.
  • Pick a sump with baffles to reduce microbubbles.
  • Look for an area for a heater and auto top-off system.

A sump kit adds extra water volume, hides equipment, and improves filtration for freshwater or saltwater tanks. The best kit is the one that fits your cabinet, matches your tank’s flow needs, and includes a reliable overflow and return pump, because a failure there can flood a room.

What a Sump Does

A sump is a secondary tank, usually under the display tank, that receives water through an overflow box or drilled bulkhead. Water passes through filter media, a protein skimmer, or a refugium before a pump sends it back up. The extra volume stabilizes temperature and water chemistry, and it lets you hide heaters, probes, and other gear. Sumps are especially popular on reef tanks, but they also benefit heavily stocked freshwater setups.

Overflow Type Is the First Decision

Your tank is either drilled, with holes for plumbing, or undrilled. Drilled tanks use internal or built-in overflow boxes. Undrilled tanks use hang-on-back overflows, which rely on siphons and can fail during power outages if not designed carefully. Many hobbyists prefer drilled tanks for reliability. If you plan to drill glass yourself, get advice from experienced aquarists and use proper bits. Check that the kit’s plumbing sizes match your overflow’s flow capacity.

Component Purpose What to check
Sump tank Holds equipment and extra water Fits cabinet, baffle layout, glass thickness
Overflow box Carries water to the sump Flow rating, noise, safety features
Return pump Pushes water back to the display GPH rating adjusted for head height
Plumbing Connects the system Bulkhead size, unions, valves
Filter media and socks Mechanical and biological filtration Easy to clean and replace
Skimmer (saltwater) Removes organics Rated for your tank volume

Sizing the Sump and Pump

As a general guideline, many aquarists size a sump at roughly 20 to 40 percent of the display tank’s volume, though bigger can be better if your cabinet permits. Measure the cabinet’s interior carefully, including doors and plumbing clearance. For the return pump, aim for turnover that suits your tank type. A rule of thumb for many setups is around 3 to 5 times the display volume per hour, after accounting for head loss from height and plumbing. Pump manufacturers publish flow curves, which are more accurate than a single GPH number.

  • Choose a pump with a adjustable flow if possible.
  • Leave extra space for water to drain back during a power outage.
  • Pick a sump with baffles to reduce microbubbles.
  • Look for an area for a heater and auto top-off system.

Safety and Flood Prevention

Power outages are the classic sump hazard. When the return pump stops, water continues to drain from the display into the sump. If the sump cannot hold the extra water, it overflows. Calculate the drain-back volume and leave enough empty space in the sump to receive it. Use check valves or siphon breaks as appropriate, and consider an overflow with a secondary emergency drain. Place the system on a stable stand, use leak alarms, and keep electrical connections above floor level with drip loops. If you are unsure, consult a local fish store or an experienced reefer.

You can search for a aquarium sump kit for drilled tanks to see typical component packages, or add a aquarium leak detector alarm as an extra safeguard.

Filtration and Extras

Many sumps include a filter sock holder, a bio media chamber, and space for a refugium, where macroalgae can reduce nutrients. Saltwater setups benefit from a protein skimmer. Freshwater tanks might use only mechanical and biological media. An auto top-off system keeps the water level stable as evaporation occurs, preventing salinity swings in saltwater tanks. A quality aquarium auto top off system is a common upgrade.

Maintenance and Common Mistakes

Replace or clean filter socks regularly to prevent nutrient buildup, and check pumps for impeller debris. Test water often, especially when starting a new system. A common error is oversizing the pump without considering overflow capacity, which can create noise or flooding. Another is neglecting drain-back volume. Cycle the system with fresh water for several days to test for leaks before adding livestock.

Material and build quality deserve a look. Glass sumps are common and easy to inspect, while acrylic is lighter and easier to modify but can scratch. Check that baffles are cleanly sealed, since leaks between chambers affect performance. Some kits come with pre-cut baffles you glue yourself, while others are fully assembled. If you prefer minimal DIY work, choose an assembled model, and look for drains and ports that match standard plumbing sizes.

Noise is worth planning for. Overflow boxes can gurgle if the flow is not tuned, and return pumps produce hum. Adjustable standpipes, quiet pumps, and a sound-dampening mat under the sump can make a big difference in a living room. Think about access as well: the sump should be easy to reach for changing socks and checking equipment without moving the whole stand.

Finally, expect a learning curve. Most hobbyists run a trial period with plain water, adjust the water level, and fine-tune flow before introducing livestock. Take notes on pump settings and water levels, because they help you troubleshoot later.

Frequently Asked Questions

Do I need a sump for a freshwater tank?

No, but it can add filtration capacity and hide equipment, especially in large or heavily stocked tanks.

Can I add a sump to an undrilled tank?

Yes, using a hang-on-back overflow. They require careful setup and monitoring.

How noisy are sumps?

Well-tuned systems are fairly quiet. Noise usually comes from drains, so use standpipes and flow adjustments.

A
Autocad Kursu Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

Do I need a sump for a freshwater tank?
No, but it can add filtration capacity and hide equipment, especially in large or heavily stocked tanks.
Can I add a sump to an undrilled tank?
Yes, using a hang-on-back overflow. They require careful setup and monitoring.
How noisy are sumps?
Well-tuned systems are fairly quiet. Noise usually comes from drains, so use standpipes and flow adjustments.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Aquarium Sump Kits: What to Check Before You…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account

As an Amazon Associate we earn from qualifying purchases.