Key takeaways
- Camera inputs: does your camera have a timecode input, a 3.5mm audio input that accepts LTC, or neither?
- Audio recorder support: many recorders and mixers accept timecode, but formats differ.
- Frame rates: the device must support the frame rate you shoot, such as 23.976, 24, 25 or 29.97.
- Drop-frame versus non-drop-frame: match the setting your editor expects.
- Cabling: check which cable connects to each camera, and keep spares.
- Software: some brands provide apps that help set time, label cameras and check sync.
Timecode sync devices give every camera and audio recorder on a multicam shoot the same running clock, so footage lines up automatically in editing. The right device depends on your cameras’ timecode inputs, how many units you need, whether you want wireless sync and how often you must re-jam. Check compatibility with your exact gear before buying.
What Timecode Sync Solves
Without shared timecode, editors sync multiple cameras by waveform matching or by visual clap marks, which can be slow and unreliable on long takes or when audio is poor. Timecode embeds a numeric clock in each file, and editing software uses it to align clips. When all devices start with the same timecode and stay in step, setup time in post drops dramatically.
Devices drift over time because each internal clock runs slightly differently. Good sync boxes keep that drift small and let you re-jam periodically. Always ask how long a device stays accurate between syncs, and read the manufacturer’s stated drift figures.
How the Units Work
Most small timecode generators plug into the camera’s timecode input or a compatible audio input, and they transmit timecode in one of two ways. Some use a wireless link, often Bluetooth, to sync units to a master clock. Others use cables and connectors. Many generators can act as either a master or a follower. One unit sets the time, and the rest “jam sync” to it, then keep running on their own internal clocks.
Common well-known options come from companies such as Tentacle Sync, Deity, Atomos and others. For a quick comparison, a search for a Tentacle Sync timecode box shows multi-unit kits designed for small crews.
Types of Setup
| Approach | How It Works | Best For | Limitation |
|---|---|---|---|
| Dedicated timecode generators | Small units on each camera or recorder | Multicam events, interviews | Cost per unit adds up |
| Wireless master with followers | Bluetooth or radio sync | Run and gun with moving cameras | Range and interference |
| Wired genlock and timecode | Cabled reference signal | Studio and broadcast setups | Cable runs, more gear |
| Audio-based timecode (LTC) | Timecode recorded on an audio track | Cameras without a timecode port | Takes an audio channel |
| Software waveform sync | Aligns audio in post | Low-budget shoots | Needs usable scratch audio |
Compatibility Questions to Ask
- Camera inputs: does your camera have a timecode input, a 3.5mm audio input that accepts LTC, or neither?
- Audio recorder support: many recorders and mixers accept timecode, but formats differ.
- Frame rates: the device must support the frame rate you shoot, such as 23.976, 24, 25 or 29.97.
- Drop-frame versus non-drop-frame: match the setting your editor expects.
- Cabling: check which cable connects to each camera, and keep spares.
- Software: some brands provide apps that help set time, label cameras and check sync.
Not every camera can receive external timecode, and some only accept it through a particular port. Read your camera manual and the sync device’s compatibility list, and test the setup before the shoot day. If one or two cameras lack timecode input, you can still record the generator’s audio signal on an audio track and decode it later.
Power, Ergonomics and Reliability
Check battery life, charging method and the way units mount to a camera. Small units that attach to a cold shoe or rig are convenient, while those that need additional cages add bulk. Look at how clearly the display shows status and sync state. During busy shoots you do not want to guess whether a device is jammed.
Consider durability and the reliability of connectors, since cables see a lot of strain. A 3.5mm timecode cable that fits your camera is cheap insurance to keep in your kit. Include an extra power bank in case batteries run low.
Best Practices on Set
Jam sync all units before you start and again at set intervals, such as at lunch or after a long idle period. Many professionals check sync by filming a clapper or a timecode slate at the start and end of each day. Label devices and cameras so you know which is the master. Record backup audio on each camera for waveform matching in case something fails.
In post, import clips into your editing software and use its multicam or sync function, selecting timecode as the sync method. Confirm that clips line up visually and audibly. Keep notes about frame rate and timecode mode per project to prevent confusion later. For audio recorders, a field audio recorder with timecode keeps your sound files aligned with the video too.
Budget is the last consideration. Buying two or three units for a small crew is often enough to start, since one master can feed several followers when the units support it. Renting a kit for a one-off event is a reasonable way to test the workflow before buying. Whichever route you take, practice the jam and check routine at home, record a short test with every camera and confirm in your editing software that the clips line up before the real shoot day.
Also keep a simple written log for each shoot day: the frame rate, timecode mode, which unit was the master and the time of every re-jam. If a clip ever fails to line up, that note speeds up troubleshooting, and your editor will thank you for the clear record when many cards come in from different cameras at once.
Quick Answers
Do I need timecode if I have good audio?
Not always. Waveform sync works with usable audio, but timecode is faster and more reliable for long takes.
How often should I re-jam?
Follow the maker’s drift specifications. Re-jamming at least a few times a day is a common habit on busy shoots.
Can I use these with DSLRs?
Only through an audio input recording LTC, since many DSLRs lack a timecode port.
FAQ
Do I need timecode if I have good audio?
How often should I re-jam?
Can I use these with DSLRs?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.
Write Your Review
No reviews yet. Be the first to share your experience!